LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 308 (Dynamic Radar Cruise Control System (M20A-FKS) - Diagnostic Codes & Circuit Tests) >> DYNAMIC RADAR CRUISE CONTROL SYSTEM (for M20A-FKS) >> Distance Control Switch Circuit [01/2019 - 03/2019] >> Description

Distance Control Switch Circuit [01/2019 - 03/2019]: Description

WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

The vehicle-to-vehicle distance control switch is used to set the distance for vehicle-to-vehicle distance control mode. The vehicle-to-vehicle distance control switch is installed in the steering pad switch assembly. The vehicle-to-vehicle distance set value can be changed by operating the vehicle-to-vehicle distance control switch while the dynamic radar cruise control system is controlling vehicle speed in vehicle-to-vehicle distance control mode.