Inspection [01/2019 - 09/2022]: Procedure
WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, and 2020 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY
*a Component without harness connected
(Vehicle Approaching Speaker Assembly)Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 Always 3.2 to 4.8 Ω HINT:
Make sure that there are no problems such as looseness or play with the installation of the vehicle approaching speaker assembly. If the result is not as specified, replace the vehicle approaching speaker assembly.