LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 279 (Automatic Transaxle System - Service Information (2 Of 2)) >> Oil Pump >> Disassembly [09/2024 - ] >> Procedure

Disassembly [09/2024 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota GR Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE CLUTCH DRUM OIL SEAL RING 
    1. Remove the 4 clutch drum oil seal rings from the stator shaft assembly.
      GTY698807Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE OIL STRAINER ASSEMBLY 
    1. Using a T30 "TORX" socket wrench, remove the 2 bolts and oil strainer assembly from the front oil pump cover sub-assembly.
      GTY698806Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE STATOR SHAFT ASSEMBLY 
    1. Remove the 5 bolts and stator shaft assembly from the front oil pump body.
      GTY698817Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE FRONT OIL PUMP DRIVE GEAR 
    1. Remove the front oil pump drive gear from the front oil pump body.
      GTY698819Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FRONT OIL PUMP DRIVEN GEAR 
    1. Remove the front oil pump driven gear from the front oil pump body.
      GTY698818Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE FRONT OIL PUMP BODY 
    1. Remove the front oil pump body from the front oil pump cover sub-assembly.
      GTY698820Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE RING PIN 
    1. Remove the 2 ring pins from the front oil pump cover sub-assembly.
      GTY733622Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals