Removal [01/2019 - 11/2022]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE LOWER STEERING COLUMN COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 5 [01/2019 - 03/2019] , or refer to PROCEDURE - Step 5 [03/2019 - 09/2019] , or refer to PROCEDURE - Step 5 [09/2019 - 04/2020] , or refer to PROCEDURE - Step 5 [04/2020 - 09/2022] , or refer to PROCEDURE - Step 5 [09/2022 - 11/2022]

REMOVE IGNITION OR STARTER SWITCH ASSEMBLY

Disconnect ignition or starter switch assembly connector.

Disengage the 2 claws and remove the ignition or starter switch assembly from the upper steering column bracket assembly.