LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Engine Starting System (2ZR-FAE) - Service Information) >> Engine Switch >> Removal [01/2019 - 11/2022] >> Procedure

Removal [01/2019 - 11/2022]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 3 [01/2019 - 09/2022] , or refer to PROCEDURE - Step 3 [09/2022 - 11/2022]

  2. REMOVE ENGINE SWITCH 
    1. Disengage the 2 claws as shown in the illustration.
      GTY911133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the engine switch connector to remove the engine switch.
      GTY911132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals