LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Safety Connect System (Hatchback, Late 2020) (Except HEV) - Diagnostics - Introduction) >> SAFETY CONNECT SYSTEM (for Hatchback, Gasoline Model) >> Initialization [09/2019 - 04/2020] >> Initialization [09/2019 - 04/2020]

Initialization [09/2019 - 04/2020]

WARNING: This page is about a different car, the 2020 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. RESET BUB (BACK-UP BATTERY) CONDITION 

    HINT: 

    If the BUB (Back-Up Battery) has been replaced, it is necessary to perform the Reset Backup Battery Condition procedure.

    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Choose "Telematics" from the System Selection Menu, and then click "Utility".
    5. Click "Backup Battery Replacement Reset" on the Utility Selection Menu.

      Body Electrical > Telematics > Utility 

      Tester Display
      Backup Battery Replacement Reset
    6. According to the display on the Techstream, perform Backup Battery Replacement Reset to reset the BUB (Back-Up Battery) replacement flag.
scientia non olet · About LEMON Manuals