Customize Parameters [04/2020 - 09/2022]
WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- CUSTOMIZE METER / GAUGE SYSTEM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Warning or Display.
- Select the setting by referring to the table below.
Warning
Tester Display Description Default Setting ECU Flasher Sound Volume Adjust Function to change the flasher sound volume Medium $02:Large, $00:Medium, $01:Small Combination meter assembly Display
Tester Display Description Default Setting ECU ODO Display Time After IG OFF Adjust Function to change the ODO display time after the engine switch is turned off 30s $00:30s, $01:60s, $02:600s, $03:OFF Combination meter assembly ECO Drive Indicator Zone Display Function (Meter) Function to enable/disable the eco driving indicator ON $00:OFF, $01:ON Combination meter assembly
- Customizing with the multi-information display
- Turn the engine switch on (IG).
- Select the settings tab on the multi-information display and set the customize settings.
Display Description Setting ECU Clock Setting - Set minutes to 00 - Combination meter assembly Detail Settings 12H/24H setting and clock adjustment LDA Steering Assist Steering control function setting ON/OFF Forward recognition camera Alert Lane departure alert method setting Buzzer/OFF Sensitivity Lane departure alert timing setting 1/2 Sway Warning Vehicle sway warning function setting ON/OFF Sway Sensitivity Sway warning sensitivity setting 1/2/3 LTA Lane Center Lane tracing assist function setting ON/OFF Forward recognition camera Steering Assist Steering control function setting ON/OFF Alert Lane departure alert method setting Buzzer/OFF Sensitivity Lane departure alert timing setting 1/2 Sway Warning Vehicle sway warning function setting ON/OFF Sway Sensitivity Sway warning sensitivity setting 1/2/3 PCS - Pre-collision system setting ON/OFF Forward recognition camera Sensitivity Pre-collision system sensitivity setting 1/2/3 BSM - Blind spot monitor system setting ON/OFF Blind spot monitor sensor LH (B) Brightness Outer rear view mirror indicator brightness setting 1/2 Sensitivity Blind spot monitor system sensitivity setting 1/2/3/4 RCTA - Rear crossing traffic alert function setting ON/OFF Blind spot monitor sensor LH (B) HUD Main - Headup display system setting ON/OFF Meter mirror sub-assembly HUD Brightness/Position Brightness and position setting for headup display - HUD Driving Support Tachometer Settings Display setting for headup display Blank/Eco Indicator/Tachometer Navigation Display setting for headup display ON/OFF Lane Display setting for headup display ON/OFF Driving Assist Display setting for headup display ON/OFF Compass Display setting for headup display ON/OFF Audio Display setting for headup display ON/OFF HUD Rotation Headup display image calibration (rotation calibration) - RSA - Road sign assist system setting ON/OFF Forward recognition camera Notification Method Above Speed Limit Excess speed notification method setting No Notification/Only Visual/Visual & Audio Overtaking No overtaking notification method setting No Notification/Only Visual/Visual & Audio Others Others traffic sign notification method setting No Notification/Only Visual/Visual & Audio Notification Level Excess speed notification level setting -5 to 10 Vehicle Settings TPWS Tire inflation pressure display function setting Set Pressure/Change Wheel Tire pressure warning ECU and receiver Scheduled Maintenance Scheduled maintenance value reset Yes/No Combination meter assembly Settings Language Display language setting * Related ECUs Units Display units setting * Meter Type Multi-information display layout setting Analog/Digital Combination meter assembly Eco driving indicator light Eco driving indicator light display setting ON/OFF Audio tab Audio tab display setting ON/OFF Vehicle information tab Drive Info Type Displayed drive information display item setting Trip/Total Drive Info Items Displayed drive information display item setting - Trip Summary Current trip result display setting Drive Info/Eco Score Pop-Up Display TbT Navigation Interrupt display setting for navigation system-linked ON/OFF Telephone Interrupt display setting for phone-linked ON/OFF Audio Operation Interrupt display setting for audio system-linked ON/OFF Volume Operation Interrupt display setting for volume operation ON/OFF Voice Control Interrupt display setting for voice recognition ON/OFF Calendar Date setting - Multi-Information Display OFF Multi-information display off setting - Default Settings Reset the combination meter settings to the default setting - Related ECUs - *: Changes according to the vehicle specification
HINT:
Depending on the specifications of the vehicle, some items may not be displayed.