On-Vehicle Inspection [01/2019 - 11/2022]: Procedure
WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT V-RIBBED BELT
- Check the V-ribbed belt for wear, cracks or other signs of damage.
HINT:
If any of the following defects is found, replace the V-ribbed belt.
- The V-ribbed belt is cracked.
- The V-ribbed belt is worn out to the extent that the cords are exposed.
- The V-ribbed belt has chunks missing from the ribs.
- Check that the V-ribbed belt fits properly in the ribbed grooves.
*a Correct *b Incorrect HINT:
Check with your hand to confirm that the V-ribbed belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.
- Check the V-ribbed belt for wear, cracks or other signs of damage.