Utility [09/2022 - 11/2022]
WARNING: This page is about a different car, the 2023 Toyota GR Corolla and 2023 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- WRITE VIN/VEHICLE IDENTIFICATION NUMBER NOTE:
- When the airbag sensor assembly is replaced, it is necessary to write the VIN/Vehicle Identification Number.
- Since the VIN information of the airbag sensor assembly is acquired via ECM, it is necessary to first write the VIN of ECM.
After writing ECM VIN information, first turn the ignition switch from off to ON and then write VIN information to the airbag sensor assembly.
for G16E-GTS: Refer to REGISTRATION [09/2022 - ]
for M20A-FKS: Refer to REGISTRATION [06/2018 - ]
for 2ZR-FXE: Refer to REGISTRATION [01/2019 - ]
- SWITCHING SPECIFICATION INFORMATION NOTE:
- When the airbag sensor assembly is replaced, it is necessary to switch the specification information.
- The airbag sensor assembly specification information is acquired from the forward recognition camera.