Caution / Notice / Hint

WARNING: This page is about a different car, the 2023 Toyota GR Corolla and 2023 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.
Refer to PRECAUTION [09/2022 - 11/2022]
When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
When the forward recognition camera has been replaced with a new one, make sure to clear all stored vehicle control history of each system and the forward recognition camera beam axis alignment data.
HINT:

Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".

One Time Recognition: Refer to TARGET ADJUSTMENT (ONE TIME RECOGNITION) [09/2022 - 11/2022]

Driving Adjustment: Refer to DRIVING ADJUSTMENT [09/2022 - 11/2022]

Camera Axis Adjustment Value Write: Refer to CAMERA AXIS ADJUSTMENT VALUE WRITE [09/2022 - 11/2022]
If the forward recognition camera has been replaced with a new one, make sure to perform Software Version Confirmation.
Refer to SOFTWARE VERSION CONFIRMATION [09/2022 - 11/2022]
for Gasoline Model
Before replacing the ECM, refer to registration.

Refer to REGISTRATION [09/2022 - 11/2022]
for HV Model
Before replacing the hybrid vehicle control ECU, refer to registration.

Refer to REGISTRATION [09/2022 - ]