Removal [09/2022 - 11/2022]: Procedure

WARNING: This page is about a different car, the 2025 Toyota GR Corolla, 2024 Toyota GR Corolla, and 2023 Toyota GR Corolla. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT WHEEL RH
Refer to REMOVAL [09/2022 - ]
REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
See step 9
REMOVE REAR ENGINE UNDER COVER RH
See step 11
REMOVE FAN AND GENERATOR V BELT
Refer to PROCEDURE - Step 3
REMOVE CRANKSHAFT PULLEY ASSEMBLY
Refer to PROCEDURE - Step 14

REMOVE TIMING CHAIN COVER OIL SEAL

Using a screwdriver, pry out the timing chain cover oil seal.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Protective Tape

NOTE:

Do not damage the surface of the timing chain cover oil seal press fit hole or the crankshaft.

HINT:

Tape the screwdriver tip before use.