LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Engine Mechanical System - Service Information (1 Of 3)) >> Drive Belt >> On-Vehicle Inspection [09/2022 - ] >> Procedure

On-Vehicle Inspection [09/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota GR Corolla, 2024 Toyota GR Corolla, and 2023 Toyota GR Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FAN & GENERATOR V BELT 
    1. Check the fan and generator V belt for wear, cracks or other signs of damage.
      GTY764768Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If any of the following defects is found, replace the fan and generator V belt.

      • The fan and generator V belt is cracked.
      • The fan and generator V belt is worn out to the extent that the cords are exposed.
      • The fan and generator V belt has chunks missing from the ribs.
    2. Check that the fan and generator V belt fits properly in the ribbed grooves.
      GTY765632Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Correct
      *b Incorrect

      HINT: 

      Check with your hand to confirm that the fan and generator V belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.

scientia non olet · About LEMON Manuals