LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Cooling System (2ZR-FAE) - Service Information) >> Water Pump >> Removal [03/2019 - 09/2022] >> Procedure

Removal [03/2019 - 09/2022]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 7

  2. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 1

  3. REMOVE GENERATOR ASSEMBLY 

    Refer to REMOVAL [03/2019 - 09/2022]

  4. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY 

    Refer to PROCEDURE - Step 23

  5. REMOVE ENGINE WATER PUMP ASSEMBLY 
    1. Remove the 6 bolts and engine water pump assembly.
      GTY866238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the gasket.
      GTY866232Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals