On-Vehicle Inspection [09/2024 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota GR Corolla. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT SHIFT LEVER POSITION
1. When moving the shift lever from P to R with the ignition switch ON and the brake pedal depressed, check that the shift lever moves smoothly and correctly into position.
2. Start the engine and check that the vehicle moves forward when the shift lever is moved from N to D and moves rearward when the shift lever is moved to R.
  If the operation is not as specified, inspect the park/neutral position switch assembly and inspect the shift lock control unit assembly.
INSPECT SHIFT LOCK OPERATION
1. Move the shift lever to P.
2. Turn the ignition switch off.
3. Check that the shift lever cannot be moved from P to any other position.
4. Turn the ignition switch to ON, depress the brake pedal, and check that the shift lever can be moved to another position.
  If the operation is not as specified, inspect the shift lock control unit assembly.
  
  Refer to INSPECTION [09/2024 - ]
INSPECT SHIFT LOCK RELEASE BUTTON OPERATION
1. Move the shift lever to P.
2. Turn the ignition switch off.
3. Remove the shift lock release button cover.
  See step 2
4. Press the shift lock release button and check that the shift lever can be moved from P to any other position.