LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Automatic Transaxle System (K313) - Service Information) >> Pattern Select Switch >> Removal [01/2019 - 11/2022] >> Procedure

Removal [01/2019 - 11/2022]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    See step  1

  2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1 [01/2019 - 09/2022] , or refer to PROCEDURE - Step 1 [09/2022 - 11/2022]

  3. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 3 [01/2019 - 09/2022] , or refer to PROCEDURE - Step 3 [09/2022 - 11/2022]

  4. REMOVE FRONT CONSOLE UPPER PANEL GARNISH 

    Refer to PROCEDURE - Step 5 [01/2019 - 09/2022] , or refer to PROCEDURE - Step 5 [09/2022 - 11/2022]

  5. REMOVE POSITION INDICATOR HOUSING ASSEMBLY 

    Refer to PROCEDURE - Step 10 [01/2019 - 09/2022] , or refer to PROCEDURE - Step 10 [09/2022 - 11/2022]

  6. REMOVE COMBINATION SWITCH ASSEMBLY 
    1. Disengage the 4 claws and remove the combination switch assembly from the position indicator housing assembly.
      GTY845548Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals