Engine Oil Pressure Switch Circuit [09/2022 - 11/2022]: Procedure

for 2ZR-FXE: Refer to INSPECTION [01/2019 - ]

for 2ZR-FAE: Refer to INSPECTION [01/2019 - 11/2022]

Result

Result: 

NG 

REPLACE ENGINE OIL PRESSURE SWITCH ASSEMBLY 

for 2ZR-FXE: Refer to REMOVAL [01/2019 - ]

for 2ZR-FAE: Refer to REMOVAL [01/2019 - 11/2022]

Result: 

OK 

See step  2

1. Disconnect the I5 combination meter assembly connector.
2. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   C39-1 - I5-9 (S)*1 C39-1 - I5-23 (S)*2	Always	Below 1 Ω
   C39-1 or I5-9 (S) - Body ground*1 C39-1 or I5-23 (S) - Body ground*2	Always	10 kΩ or higher

   1. *1: for TMC Made
   2. *2: for TMMC Made

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE COMBINATION METER ASSEMBLY. Refer to  REMOVAL [09/2022 - 11/2022] 

Result: 

NG 

REPAIR OR REPLACE HARNESS OR CONNECTOR