LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2023 >> RAV4 XLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Navigation System - Diagnostic Codes (1 Of 2)) >> Navigation System >> DTC B1556: Extension Module Malfunction 2 [11/2018 - 10/2022] >> Procedure

DTC B1556: Extension Module Malfunction 2 [11/2018 - 10/2022]: Procedure

WARNING: This page is about a different car, the 2022 Toyota RAV4, 2021 Toyota RAV4, 2020 Toyota RAV4, and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Clear the DTCs.

      Refer to DTC CHECK / CLEAR [11/2018 - 10/2019] , or refer to DTC CHECK / CLEAR [10/2019 - 10/2022]

      Body Electrical > Navigation System > Clear DTCs 

    2. Recheck for DTCs and check that no DTCs are output.

      Refer to DTC CHECK / CLEAR [11/2018 - 10/2019] , or refer to DTC CHECK / CLEAR [10/2019 - 10/2022]

      Body Electrical > Navigation System > Trouble Codes 

      OK

      No DTCs are output.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ] 

    Result: 

    NG 

    REPLACE NAVIGATION ECU. Refer to  REMOVAL [11/2018 - 10/2019]  , or refer to  REMOVAL [10/2019 - 10/2022]