LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2023 >> RAV4 XLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Control System (A25A-FKS) (W/ Canister Pump Module) - Diagnostic Codes (3 Of 7)) >> SFI SYSTEM (w/ Canister Pump Module) >> DTC P0400-00: Exhaust Gas Recirculation "A" Flow; DTC P0401-9C: Exhaust Gas Recirculation "A" Low / Insufficient Flow; DTC P0402-9B: Exhaust Gas Recirculation "A" High/Excessive Flow [11/2018 - 08/2020] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

P0400-00 

During fuel cut (vehicle being driven with idle ON), when the change in intake manifold pressure when the EGR valve assembly is operating and not operating is insufficient, the ECM determines that the EGR valve is stuck and stores DTC P0400-00 and illuminates the MIL.

P0401-9C 

During fuel cut (vehicle being driven with idle ON), when the change in intake manifold pressure when the EGR valve assembly is operating and not operating is insufficient, the intake manifold pressure is less than the threshold when the EGR valve assembly is not operating, the ECM determines that the flow through the EGR valve is hindered and stores DTC P0401-9C and illuminates the MIL.

P0402-9B 

During fuel cut (vehicle being driven with idle ON), when the change in intake manifold pressure when the EGR valve assembly is operating and not operating is insufficient, the intake manifold pressure is more than the threshold when the EGR valve assembly is not operating, the ECM determines that the flow through the EGR valve is excessive and stores DTC P0402-9B and illuminates the MIL.