Monitor Description
WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
A DTC will be stored if any of the following occurs:
- The crankshaft position sensor signal (NE signal) is not received by the ECM when the engine is being cranked.
- The crankshaft position sensor signal (NE signal) is not received by the ECM when the engine is running.
- The engine stalls and the engine speed signal value decreases rapidly (under normal conditions the engine speed will decrease gradually).