DTC P107A-2A: Fuel Rail Pressure Sensor (Low) / Fuel Rail Pressure Sensor "B" Signal Stuck in Range; DTC P107A-64: Fuel Rail Pressure Sensor (Low) / Fuel Rail Pressure Sensor "B" Signal Plausibility Failure [10/2019 - 08/2020]: Description
WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
Refer to DTC P107A-11.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P107A-2A | Fuel Rail Pressure Sensor (Low) / Fuel Rail Pressure Sensor "B" Signal Stuck in Range | When the target fuel pressure for the low pressure side changes, the change in the fuel pressure sensor (for low pressure side) value is abnormal (2 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P107B |
| P107A-64 | Fuel Rail Pressure Sensor (Low) / Fuel Rail Pressure Sensor "B" Signal Plausibility Failure | When the fuel pump on the low pressure side is operated at the maximum during a fuel cut, the low pressure side fuel pressure is higher or lower than threshold (2 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P107B |