Red Indicator Remains On [11/2018 - 10/2019]: Procedure

1. Turn the ignition switch off.
2. Connect the Techstream to the DLC3.
3. Turn the ignition switch to ON and wait for 10 seconds.
4. Turn the Techstream on.
5. Perform "Health Check" and check for current DTCs.

   Refer to HEALTH CHECK [11/2018 - 10/2019]

   Result

   Result	Proceed to
   DTCs are not output	A
   DTCs are output	B

Result: 

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [11/2018 - 10/2019] 

Result: 

A 

See step  2

1. Replace the DCM (Telephone Transceiver Assembly).

   Refer to REMOVAL [11/2018 - 10/2019]

   NOTE:

   • The ignition switch must be off.
   • Do not exchange the DCM (Telephone Transceiver Assembly) with one from another vehicle.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

PERFORM DCM ACTIVATION. Refer to  DCM ACTIVATION [11/2018 - 10/2019]