DTC B15EC: Backup Battery Degradation [11/2018 - 10/2019]: Procedure

1. Turn the ignition switch off.
2. Connect the Techstream to the DLC3.
3. Turn the ignition switch to ON and wait for 10 seconds.
4. Turn the Techstream on.
5. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [11/2018 - 10/2019]

   Body Electrical > Telematics > Clear DTCs 

6. Recheck for DTCs.

   Refer to DTC CHECK / CLEAR [11/2018 - 10/2019]

   Body Electrical > Telematics > Trouble Codes 

   Result

   Result	Proceed to
   DTC B15EC is output	A
   DTC B15EC is not output	B

Result: 

A 

REPLACE BUB (BACK-UP BATTERY). Refer to  REMOVAL [11/2018 - 10/2019] 

Result: 

B 

CHECK FOR INTERMITTENT PROBLEMS. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ]