LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2023 >> Prius XLE >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (1 Of 2) >> REAR LOWER ARM (for AWD LH Side) >> Removal [12/2022 - 03/2023] >> Procedure

Removal [12/2022 - 03/2023]: Procedure

  1. REMOVE REAR FLOOR SIDE MEMBER COVER LH 

    See step  1

  2. REMOVE REAR FLOOR SIDE MEMBER COVER RH 

    See step  2

  3. REMOVE REAR WHEEL 

    Refer to REMOVAL [12/2022 - ]

  4. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY LH 
    1. GTY1144268Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 2 bolts, 2 nuts and rear No. 1 suspension arm assembly LH from the rear axle carrier sub-assembly and rear suspension member sub-assembly.
        NOTE:

        Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

  5. REMOVE REAR TRACTION MOTOR WITH TRANSAXLE ASSEMBLY 

    Refer to REMOVAL [12/2022 - ]

  6. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH 
    1. GTY1142088Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the nut, No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear No. 2 suspension arm assembly LH.
        NOTE:

        Hold the rear suspension toe adjust cam sub-assembly while rotating the nut.

scientia non olet · About LEMON Manuals