Removal [03/2023 - ]: Procedure
- REMOVE TONNEAU COVER ASSEMBLY
Refer to PROCEDURE - Step 1
- REMOVE DECK BOARD ASSEMBLY
Refer to PROCEDURE - Step 2
- REMOVE REAR SEAT HEADREST ASSEMBLY (for LH Side)
Refer to PROCEDURE - Step 4
- REMOVE REAR SEATBACK ASSEMBLY LH
Refer to PROCEDURE - Step 7 - REMOVE REAR SEAT CUSHION ASSEMBLY
Refer to PROCEDURE - Step 8 - REMOVE REAR SEAT CUSHION LOCK HOOK
Refer to PROCEDURE - Step 9
- REMOVE DECK FLOOR BOX RH
Refer to PROCEDURE - Step 3
- REMOVE DECK FLOOR BOX LH
Refer to PROCEDURE - Step 4
- REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)
Refer to PROCEDURE - Step 35
- REMOVE REAR DECK TRIM COVER
Refer to PROCEDURE - Step 36
- REMOVE REAR DOOR SCUFF PLATE INSIDE LH
Refer to PROCEDURE - Step 14
- DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH
Refer to PROCEDURE - Step 10
- REMOVE REAR UNDER SIDE COVER LH (for HEV Model)
Refer to PROCEDURE - Step 16
- REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 32
- REMOVE REAR SEAT SIDE GARNISH LH
Refer to PROCEDURE - Step 33 - REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)
Refer to PROCEDURE - Step 34
- REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
Refer to PROCEDURE - Step 37 - REMOVE FUEL FILLER OPENING LID LOCK COVER (w/ Cover)
- REMOVE FUEL FILLER OPENING LID LOCK RETAINER
- REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY