Caution / Notice / Hint

HINT:

COMPONENTS (INSTALLATION)

Fig 1: Rear Lower Arm (For PHEV Model) Installation Components (1 Of 8)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
1	TEMPORARILY INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY	48740F	See step 1	-	-

REAR SUSPENSION TOE ADJUST CAM SUB-ASSEMBLY

NO. 2 CAMBER ADJUST CAM

Fig 2: Rear Lower Arm (For PHEV Model) Installation Components With Torque Specifications (2 Of 8)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
2	REAR SUSPENSION MEMBER SUB-ASSEMBLY	51206A	See step 2	-	-
3	REAR UPPER CONTROL ARM ASSEMBLY LH	48790	See step 3	-	-
4	REAR UPPER CONTROL ARM ASSEMBLY RH	48770A	-	-	-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf)

Fig 3: Rear Lower Arm (For PHEV Model) Installation Components With Torque Specifications (3 Of 8)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
5	REAR NO. 1 SUSPENSION ARM ASSEMBLY LH	48720A	See step 5	-	-
6	REAR NO. 1 SUSPENSION ARM ASSEMBLY RH	48710A	-	-	-
7	REAR LOWER COIL SPRING INSULATOR LH	48258C	-	-	-
8	REAR LOWER COIL SPRING INSULATOR RH	48258B	-	-	-
9	REAR COIL SPRING LH	48231B	See step 9	-	-
10	REAR COIL SPRING RH	48231A	-	-	-
11	REAR STABILIZER BAR	48812	See step 11	-	-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf)

Fig 4: Rear Lower Arm (For PHEV Model) Installation Components With Torque Specifications (4 Of 8)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
12	STABILIZE SUSPENSION	-	See step 12	-	-
13	REAR NO. 1 SUSPENSION ARM ASSEMBLY LH	48720A	See step 13	-	-
14	REAR NO. 1 SUSPENSION ARM ASSEMBLY RH	48710A	-	-	-
15	REAR NO. 2 SUSPENSION ARM ASSEMBLY LH	48740F	See step 15	-	-
16	REAR NO. 2 SUSPENSION ARM ASSEMBLY RH	48730F	-	-	-
17	REAR UPPER CONTROL ARM ASSEMBLY LH	48790	See step 17	-	-
18	REAR UPPER CONTROL ARM ASSEMBLY RH	48770A	-	-	-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf)

Fig 5: Rear Lower Arm (For PHEV Model) Installation Components With Torque Specifications (5 Of 8)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
19	REAR FLEXIBLE HOSE LH	47319F	-	-	-
20	REAR FLEXIBLE HOSE RH	47318F	-	-	-
21	REAR STABILIZER LINK ASSEMBLY LH	48840A	See step 21	-	-
22	REAR STABILIZER LINK ASSEMBLY RH	48830D	-	-	-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf)

Fig 6: Rear Lower Arm (For PHEV Model) Installation Components With Torque Specifications (6 Of 8)

Callout - Procedure		Part Name Code
23	TAIL EXHAUST PIPE ASSEMBLY	17430	-	-	-
24	REAR WHEEL	-	-	-	-

N*m (kgf*cm, ft.*lbf): Specified torque

•

Non-reusable part

Fig 7: Rear Lower Arm (For PHEV Model) Installation Components With Torque Specifications (7 Of 8)

Callout - Procedure		Part Name Code
25	REAR SUSPENSION TOE ADJUST CAM SUB-ASSEMBLY (for LH Side)	48409	See step 25	-	-
26	REAR SUSPENSION TOE ADJUST CAM SUB-ASSEMBLY (for RH Side)	48409	-	-	-

*1	NO. 2 CAMBER ADJUST CAM	-	-
	Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": Nm (kgfcm, ft.*lbf)	-	-

Fig 8: Rear Lower Arm (For PHEV Model) Installation Components With Torque Specifications (8 Of 8)

Callout - Procedure		Part Name Code
27	BATTERY BOX COVER	58219K	-	-	-
28	INSPECT FOR EXHAUST GAS LEAK	-	-	-	See step 28
29	INSPECT AND ADJUST REAR WHEEL ALIGNMENT	-	-	-	See step 29
30	PERFORM INITIALIZATION	-	-	-	See step 30

N*m (kgf*cm, ft.*lbf): Specified torque