DTC P062F-46: Hybrid/EV Battery Energy Control Module EEPROM Calibration / Parameter Memory Failure [12/2022 - ]: Procedure

Pre-procedure1

1. According to the display on the GTS, select "Health Check".

   Procedure1

2. Check for DTCs.

   Result

   Result	Proceed to
   P062F-46 is output from the hybrid battery system.	A
   P062F-46 is output from any system other than the hybrid battery system.	B

   Post-procedure1

3. Turn the ignition switch off.

Result: 

A 

REPLACE BATTERY ECU ASSEMBLY. Refer to  REMOVAL [12/2022 - ] 

Result: 

B 

GO TO PERFORM DIAGNOSIS FOR RESPECTIVE SYSTEM