Caution / Notice / Hint

NOTE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Refer to BEFORE DISCONNECTING BATTERY [09/2022 - ]

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [09/2022 - 11/2022]
After replacing the airbag sensor assembly, refer to work procedure.
Refer to WORK PROCEDURE [09/2022 - 11/2022]

HINT:

To perform the simulation method, enter check mode (signal check) with the GTS.
Refer to CHECK MODE PROCEDURE [09/2022 - 11/2022]
Perform the simulation method while checking the Data List.
Refer to DATA LIST / ACTIVE TEST [09/2022 - 11/2022]