Removal [08/2020 - 12/2021]: Procedure

SEPARATE FRONT STABILIZER LINK ASSEMBLY LH

Remove the nut and separate the front stabilizer link assembly from the front stabilizer bar.

NOTE:

Do not damage the boot of the ball joint.

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

SEPARATE FRONT STABILIZER LINK ASSEMBLY RH
HINT:

Perform the same procedure as for the LH side.
REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
- for HV Model:
  Refer to REMOVAL [08/2020 - 12/2021]
- for Gasoline Model:
  Refer to REMOVAL [08/2020 - 12/2021]

REMOVE FRONT STABILIZER BAR PROTECTOR (for Gasoline Model)

Remove the clip.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE FRONT NO. 1 STABILIZER BRACKET LH

Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.

REMOVE FRONT NO. 1 STABILIZER BRACKET RH
HINT:

Perform the same procedure as for the LH side.
REMOVE FRONT STABILIZER BAR
1. Remove the front stabilizer bar with 2 front stabilizer bar bushings from the front frame assembly.
REMOVE FRONT NO. 1 STABILIZER BAR BUSHING (for LH Side)
1. Remove the front No. 1 stabilizer bar bushing from the front stabilizer bar.
REMOVE FRONT NO. 1 STABILIZER BAR BUSHING (for RH Side)
HINT:

Perform the same procedure as for the LH side.