DTC P1366-29: "E" Camshaft Position Actuator Bank 1 Signal Invalid [08/2020 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0010-01.
Refer to DTC P0010-01: Camshaft Position "A" Actuator Bank 1 General Electrical Failure [08/2020 - ]
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P1366-29 | "E" Camshaft Position Actuator Bank 1 Signal Invalid | Malfunction in diagnostic signal (VTM) of cam timing control motor with EDU assembly is detected for 3 seconds (1 trip detection logic). |
|
Comes on | DTC stored |
|