DTC P0340-31: Camshaft Position Sensor "A" Bank 1 or Single Sensor No Signal [08/2020 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0340-11.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0340-31 | Camshaft Position Sensor "A" Bank 1 or Single Sensor No Signal | No camshaft position sensor (for intake camshaft) signal for 5 seconds at an engine speed of 600 rpm or higher (1 trip detection logic). |
|
Comes on | DTC stored |
|
Reference: Inspection using an oscilloscope.