DTC P0335-2A: Crankshaft Position Sensor "A" Signal Stuck in Range; DTC P0335-31: Crankshaft Position Sensor "A" No Signal [08/2020 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0335-11.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0335-2A | Crankshaft Position Sensor "A" Signal Stuck in Range | No crankshaft position sensor signal to the ECM while the engine running (1 trip detection logic). |
|
Comes on | DTC stored |
|
| P0335-31 | Crankshaft Position Sensor "A" No Signal | The engine stalls and the engine speed signal value decreases rapidly (1 trip detection logic). |
|
Comes on | DTC stored |
|
- Reference: Inspection using an oscilloscope.