DTC P0190-2A: Fuel Rail Pressure Sensor "A" Signal Stuck in Range; DTC P0190-64: Fuel Rail Pressure Sensor "A" Signal Plausibility Failure [08/2020 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0190-11.
Refer to DTC P0190-11: Fuel Rail Pressure Sensor "A" Circuit Short to Ground [08/2020 - ]
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0190-2A | Fuel Rail Pressure Sensor "A" Signal Stuck in Range | When target high pressure side fuel pressure changes, the change in fuel pressure sensor value is abnormal (2 trip detection logic). |
|
Comes on | DTC stored |
|
| P0190-64 | Fuel Rail Pressure Sensor "A" Signal Plausibility Failure | Although engine has been stopped and left as is for a long time, high pressure side fuel pressure is higher or lower than threshold (2 trip detection logic). |
|
Comes on | DTC stored |
|