DTC P0105-2A: Manifold Absolute Pressure / Barometric Pressure Sensor Signal Stuck in Range [08/2020 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0105-11.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0105-2A | Manifold Absolute Pressure / Barometric Pressure Sensor Signal Stuck in Range | Intake manifold pressure measured after engine start drops by less than 3 kPa [0.4 psi] compared to the intake manifold pressure (atmospheric pressure) measured before engine start (2 trip detection logic). |
|
Comes on | DTC stored |
|