Check Bus 4 Line for Short to +B [11/2018 - 02/2019]: Description
WARNING: This page is about a different variant/trim than selected.
There may be a short circuit between one of the CAN bus wires and +B when there is no resistance between terminal 22 (CA2H) of the central gateway ECU (network gateway ECU) and terminal 16 (BAT) of the DLC3, or terminal 7 (CA2L) of the central gateway ECU (network gateway ECU) and terminal 16 (BAT) of the DLC3
| Symptom | Trouble Area |
|---|---|
| There is no resistance between terminal 22 (CA2H) of the central gateway ECU (network gateway ECU) and terminal 16 (BAT) of the DLC3, or terminal 7 (CA2L) of the central gateway ECU (network gateway ECU) and terminal 16 (BAT) of the DLC3. |
|