Check Bus 3 Line for Short to GND [02/2019 - 10/2019]: Description
WARNING: This page is about a different variant/trim than selected.
There may be a short circuit between one of the CAN bus wires and GND when there is no resistance between terminal 6 (CA3H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 21 (CA3L) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 19 (CAYH) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 20 (CAYL) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3.
| Symptom | Trouble Area |
|---|---|
|
|
*1: w/ Bus Buffer ECU
*2: for Radio and Display Type
*3: w/ Telematics System