Check Bus 1 Line for Short to GND [08/2020 - 12/2021]: Description
WARNING: This page is about a different variant/trim than selected.
There may be a short circuit between one of the CAN bus wires and GND when there is no resistance between terminal 23 (CA1H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 8 (CA1L) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3.
| Symptom | Trouble Area |
|---|---|
| There is no resistance between terminal 23 (CA1H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 8 (CA1L) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3. |
|
*1: w/ Garage Door Opener System (for Digital Inner Mirror Type)
*2: w/ Blind Spot Monitor System
*3: w/ Panoramic View Monitor System
*4: w/ Intuitive Parking Assist System
*5: w/ Parking Assist Monitor System
*6: w/ Grille Shutter System