Inspection [12/2021 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.

INSPECT HV SUPPLY STACK SUB-ASSEMBLY

WARNING:

Be sure to wear insulated gloves and protective goggles.

Remove the HV supply stack sub-assembly.
Refer to REMOVAL [12/2021 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023] , or refer to REMOVAL [10/2023 - ]

Inspect the HV supply stack sub-assembly.

Check that no electrolyte is leaking from the No. 1 HV supply stack sub-assembly or No. 2 HV supply stack sub-assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	No. 1 HV Supply Stack Sub-assembly	*2	No. 2 HV Supply Stack Sub-assembly
*a	Check Part	-	-

There is no electrolyte leaking from the HV supply stack sub-assembly.

HINT:

If the result is not as specified, replace the No. 1 HV supply stack sub-assembly or No. 2 HV supply stack sub-assembly.