LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> RAV4 LE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 46 (Engine Starting System (A25A-FXS) - Service Information) >> Ignition Switch >> Removal [02/2019 - ] >> Procedure

Removal [02/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE LOWER STEERING COLUMN COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 16 [02/2019 - 10/2019] , or refer to PROCEDURE - Step 16 [10/2019 - 08/2020] , or refer to PROCEDURE - Step 16 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 16 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 16 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 16 [10/2023 - ]

  2. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Disconnect ignition or starter switch assembly connector.
      GTY848693Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the 2 claws and remove the ignition or starter switch assembly from the upper steering column bracket assembly.
scientia non olet · About LEMON Manuals