DTC C2A63: Back Camera Internal Circuit [11/2018 - 10/2022]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK FOR DTC
- Clear the DTCs.
Refer to DTC CHECK / CLEAR [11/2018 - 10/2022]
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
- Check for DTCs.
Refer to DTC CHECK / CLEAR [11/2018 - 10/2022]
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
OK
DTC C2A63 is not output.
Result
Proceed to OK NG
Result:
OK
END
Result:
NG
REPLACE TELEVISION CAMERA ASSEMBLY. Refer to REMOVAL [11/2018 - ]
- Clear the DTCs.