DTC C164D: Front Wheel Speed Sensor Malfunction [11/2018 - 10/2022]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK FOR DTC
- Clear the DTCs.
Refer to DTC CHECK / CLEAR [11/2018 - 10/2022]
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
- Check for DTCs.
Refer to DTC CHECK / CLEAR [11/2018 - 10/2022]
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
OK
DTC C164D is not output.
Result
Proceed to OK NG HINT:
- The DTC is stored when a malfunction occurs in the vehicle stability control system.
- If the parking assist ECU cannot read the stored information when activated, allowing the ECU to store the information again may return the system to normal.
- If troubleshooting and repair of the malfunction in the vehicle stability control system have been completed, DTC C164D will not be output again when rechecking for DTCs.
- If DTC C164D is stored frequently, duplicate the problem symptoms and perform the inspection again even if the DTC is not output when rechecking for DTCs.
Result:
OK
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ]
Result:
NG
GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 12/2021] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2021 - ]
- Clear the DTCs.