Components [08/2020 - 12/2021]
WARNING: This page is about a different variant/trim than selected.
| Callout | Description | Callout | Description |
|---|---|---|---|
| *A | for Type A | *B | for Type B |
| *C | for Short Type | *D | for Long Type |
| *1 | FRONT FENDER FRONT SPLASH SHIELD LH | *2 | FRONT FENDER FRONT SPLASH SHIELD RH |
| *3 | NO. 1 ENGINE UNDER COVER | *4 | NO. 2 ENGINE UNDER COVER ASSEMBLY |
| *a | Short Type Front Fender Front Splash Shield | *b | Long Type Front Fender Front Splash Shield |
| N.m (kgf/cm, ft.lbf): Specified torque | - | - |
| Callout | Description | Callout | Description |
|---|---|---|---|
| *A | w/ Grille Shutter | - | - |
| *1 | FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY | *2 | NO. 2 FRONT BUMPER ENERGY ABSORBER |
| *3 | RADIATOR SHUTTER SUB-ASSEMBLY | *4 | UPPER RADIATOR AIR GUIDE PLATE |
| N.m (kgf/cm, ft.lbf): Specified torque | - | - |
| *A | w/o Grille Shutter | *B | w/ Grille Shutter |
| *1 | NO. 1 RADIATOR AIR GUIDE LH | *2 | NO. 1 RADIATOR AIR GUIDE RH |
| Callout | Description | Callout | Description |
|---|---|---|---|
| *1 | HOOD LOCK ASSEMBLY | *2 | INLET AIR CLEANER ASSEMBLY |
| *3 | UPPER RADIATOR SUPPORT SUB-ASSEMBLY | *4 | HOOD LOCK CONTROL CABLE ASSEMBLY |
| N.m (kgf/cm, ft.lbf): Specified torque | MP grease |
| *A | w/o Grille Shutter | *B | w/ Grille Shutter |
| *1 | LOWER RADIATOR SUPPORT | *2 | NO. 1 RADIATOR HOSE |
| *3 | NO. 2 RADIATOR HOSE | *4 | NO. 5 WATER BY-PASS HOSE |
| *5 | NO. 6 WATER BY-PASS HOSE | *6 | RADIATOR ASSEMBLY |
| *7 | RADIATOR HOSE SUB-ASSEMBLY | *8 | RADIATOR SUPPORT CUSHION |
| *9 | NO. 4 INVERTER COOLING HOSE | *10 | NO. 5 INVERTER COOLING HOSE |
| *11 | FAN WITH MOTOR ASSEMBLY | *12 | FILLER NECK |
| *13 | RETAINER | - | - |