Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
Either of the following conditions is met: Condition (A) or (B)
CONDITION (A)
| Any two of the following conditions are met: | Conditions 1, 2 and 3 |
| 1. One of the following conditions is met: | Conditions (a), (b) or (c) |
| (a) P position switch | ON |
| (b) N position switch | ON |
| (c) Park/neutral position switch (NSW) | ON |
| 2. R position switch | ON |
| 3. D position switch | ON |
CONDITION (B)
| All of following conditions are met: | - |
| P position switch | OFF |
| N position switch | OFF |
| Park/neutral position switch (NSW) | OFF |
| R position switch | OFF |
| D position switch | OFF |