DTC B1650: Occupant Classification System Malfunction; DTC B165A: Occupant Detection Sensor Zero Point Calibration Incomplete [11/2018 - 08/2020]: Procedure
WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC (OCCUPANT CLASSIFICATION SYSTEM)
- Check for occupant classification system DTCs.
Refer to DTC CHECK / CLEAR [11/2018 - ]
Body Electrical > Occupant Detection > Trouble Codes
OK
DTCs are not output.
Result
Proceed to OK NG
Result:
NG
GO TO OCCUPANT CLASSIFICATION SYSTEM. Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2018 - 02/2019] , or refer to DIAGNOSTIC TROUBLE CODE CHART [02/2019 - ]
Result:
OK
See step 2
- Check for occupant classification system DTCs.
- CLEAR DTC
- Clear the DTCs stored in memory.
Refer to DTC CHECK / CLEAR [11/2018 - 08/2020]
Body Electrical > SRS Airbag > Clear DTCs
Result
Proceed to NEXT
Result:
NEXT
END
- Clear the DTCs stored in memory.