LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> RAV4 LE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Lighting System (W/O Headlight Ecu) - Diagnostics - Introduction) >> LIGHTING SYSTEM (w/o Headlight ECU) >> DTC Check / Clear [11/2018 - 12/2021] >> DTC Check / Clear [11/2018 - 12/2021]

DTC Check / Clear [11/2018 - 12/2021]

WARNING: This page is about a different car, the 2021 Toyota RAV4, 2020 Toyota RAV4, and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Trouble Codes.

      Body Electrical > Main Body > Trouble Codes 

    5. Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.

      Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes 

    6. Check for DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Clear DTCs.

      Body Electrical > Main Body > Clear DTCs 

    5. Body Electrical / Front Recognition Camera (Front Lighting Control) / Clear DTCs.

      Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs 

    6. Clear the DTCs.