Typical Enabling Conditions
WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor runs whenever the following DTCs are not stored | None |
| All of the following conditions are met | - |
| Either of the following conditions is met | 1 or 2 |
| 1. Both of the following conditions are met | (a) and (b) |
| (a) Last thermostat heater output terminal voltage level | Low |
| (b) Current thermostat heater output terminal voltage level | Low |
| 2. Both of the following conditions are met | (c) and (d) |
| (c) Last thermostat heater output terminal voltage level | High |
| (d) Current thermostat heater output terminal voltage level | High |
| Auxiliary battery voltage | 8 V or higher |
| Command to thermostat heater | On |