DTC B162A: Side Airbag Sensor Assembly No. 2 (RH) [11/2018 - 02/2019]: Description
WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
The side collision sensor RH circuit consists of the airbag ECU assembly and floor side airbag sensor RH.
The floor side airbag sensor RH detects impacts to the vehicle and send signals to the airbag ECU assembly to determine if the SRS should be deployed.
DTC B162A is stored when a malfunction is detected in the floor side airbag sensor RH or airbag ECU assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Test Mode / Check Mode |
|---|---|---|---|---|---|
| B162A | Side Airbag Sensor Assembly No. 2 (RH) | Either condition is met:
|
|
Comes on | Not applicable |