LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> RAV4 LE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Engine Control System (A25A-FKS) (W/ Canister Pump Module) - Diagnostic Codes (7 Of 7) & Circuit Tests (1 Of 2)) >> SFI SYSTEM (w/ Canister Pump Module) >> DTC U1103-87: Lost Communication with Stop and Start Control Module Missing Message [11/2018 - 08/2020] >> Description

DTC U1103-87: Lost Communication with Stop and Start Control Module Missing Message [11/2018 - 08/2020]: Description

WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

The ECM and engine stop and start ECU send and receive signals via CAN communication.

If a communication error occurs between the ECM and engine stop and start ECU, the ECM stores this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
U1103-87 Lost Communication with Stop and Start Control Module Missing Message There is no communication between the ECM and engine stop and start ECU (1 trip detection logic).
  • ECM
  • Engine Stop and Start ECU
  • CAN Communication System
Does not come on DTC stored SAE Code: U1103