LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> RAV4 LE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Engine Control System (A25A-FKS) (W/ Canister Pump Module) - Diagnostic Codes (7 Of 7) & Circuit Tests (1 Of 2)) >> SFI SYSTEM (w/ Canister Pump Module) >> DTC U0101-87: Lost Communication with TCM Missing Message [11/2018 - 08/2020] >> Procedure

DTC U0101-87: Lost Communication with TCM Missing Message [11/2018 - 08/2020]: Procedure

WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC U0101-87) 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: System Select / Health Check.
    5. Read the DTCs.

      Result

      Result Proceed to
      DTC U0101-87 is output A
      DTC U0101-87 and other DTCs are output B

      HINT: 

      If any DTCs other than U0101-87 are output, troubleshoot those DTCs first.

    Result: 

    REPLACE ECM. Refer to  REMOVAL [11/2018 - 08/2020] 

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [11/2018 - 10/2019]  , or Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2019 - 08/2020]