LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> RAV4 LE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Engine Control System (A25A-FKS) (W/O Canister Pump Module) - Diagnostic Codes (2 Of 4)) >> SFI SYSTEM (w/o Canister Pump Module) >> DTC P060D-49: Internal Control Module Accelerator Pedal Position Performance Internal Electronic Failure [11/2018 - 08/2020] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

The ECM monitors the input signals of the No. 1 accelerator pedal position sensor. If the input signals and control signals deviate, this DTC is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P060D-49 Internal Control Module Accelerator Pedal Position Performance Internal Electronic Failure Either of the following conditions is met (1 trip detection logic):
  • There is an ECM main CPU error.
  • There is an ECM sub CPU error.
 ECM Comes on DTC stored SAE Code: P060D
scientia non olet · About LEMON Manuals