Typical Enabling Conditions
WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| Monitor runs whenever the following DTCs are not stored | None |
CASE 1
| All of the following conditions are met | - |
| Permanent Fault Code | Not stored |
| OBDII system commands | Store |
| Battery voltage | 8 V or higher |
CASE 2
| All of the following conditions are met | - |
| Permanent Fault Code | Stored |
| OBDII system commands | Clear |
| Battery voltage | 8 V or higher |
CASE 3
| Battery voltage | 8 V or higher |